Brookside Farm has accomplished an initial goal of getting
our veggies to young children and into a local institution! North Coast
Opportunities pre-school has agreed to purchase two shares from the CSA at
Brookside Farm. The kitchen staff is looking forward to utilizing fresh farm
produce and cooking according to the harvest season. It is exciting to see that there is demand
for our produce and the goods of a Relocalized food system.

View of North Coast Opportunities Preschool

To meet the demands of the CSA, we set to work preparing our
first beds in order to transplant spinach and lettuce and to direct seed
onions, beets, carrots, lettuce, and parsnips. We removed cover crops with a
scythe, broke the soil with the low-wheel cultivator, loosened the soil with
the broadfork, and cross cut a final time with the low-wheel cultivator in
order to ready vegetable beds. The following is the sowing dates and area for
the crops that we direct seeded.

Direct Seeding Beets by Hand

According to our planting schedule, March was slated to be one
of the most active months in the greenhouse. Lettuce, cabbage, chard, spinach,
kale, tomatoes, eggplant, peppers, and tomatillo were on the list of a
scheduled 1600 starts. Unfortunately, we had poor germination on many of the
starts that were seeded early in the month (kale, spinach, and cabbage). We
monitored the Max-Min thermometer in the greenhouse and were noticing overnight
lows in the 30 and daily highs in the 70’s. After considering what might have
led to the poor germination and we finally concluded that the average soil temperatures
and nighttime temperatures were too cold. We utilized the warming temperatures
toward the middle of March to catch-up on the plants that did not do so well
earlier in the month and continued to sow starts to remain on pace with our
greenhouse schedule. By the second week of the month we had sown our peppers
and tomatoes in David Drell’s greenhouse. David used electric heating mats to
secure sufficiently warm germination temperatures, and by the end of the month
we had excellent stands of little peppers and tomatoes awaiting transplant from
their seed-flats into four-inch pots. It was amazing to see the difference
between plants started with the heated soil mats and those that fended for
themselves in the early part of March.

Tomatoes and Peppers in Four-Inch Pots

This month we also began a relationship with a local welder
to make adjustments to our low-wheel cultivator and the broadfork. Last year we
had a terrible time shearing off
the bolt that connected the stirrup hoe implement to the low-wheel
cultivator. Kevin, at KLR welding, suggested that he weld a small plate near
the back of where the stirrup hoe connects to the frame. By adding the plate
excess and needless motion has been eliminated, the implement base remains
rigid, and we have significantly reduced the threat of shearing the bolt. We
are also asking Kevin to weld reinforced tines onto the broadfork. This should
make the tines sturdier and less apt to bend and break off as they did last
year.

Glaser Hoe with Metal Block to Limit Excess Movement

Broadfork with Reinforced Tines